Use the AUX port to locally access the switch from a serial or USB interface of the PC. Use Telnet to remotely access the switch through the network.
Use Secure Shell to remotely access the switch through the network. Use the console port to locally access the switch from a serial or USB interface of the PC. Which procedure is used to access a Cisco 2960 switch when performing an initial configuration in a secure environment? To identify the device during remote access (SSH or telnet)Ī hostname must be configured before any other parameters To allow local access to the device through the console portĪ Cisco router or switch only begins to operate when its hostname is set Why is it important to configure a hostname on a device? Issue the copy startup-config running-config command. Issue the reload command without saving the running configuration.Ĭlose and reopen the terminal emulation software.ĭelete the vlan.dat file and reboot the device. What action can the technician take to discard the changes and work with the file in NVRAM? The changes did not solve the problem and were not saved. While trying to solve a network issue, a technician made multiple changes to the current router configuration file. The local DNS server is not functioning correctly. The no shutdown command was not issued for VLAN 1. The VLAN IP address and the default gateway IP address are not in the same network. The ip default-gateway command has to be issued in the VLAN interface configuration mode. The default gateway address must be 192.168.10.1. Other switches in the same network can ping this gateway. A ping to the default gateway was issued, but the ping was not successful.
0 kommentar(er)
